New York Sportsmen

General Activities => Shooting and supplies => Topic started by: Recurver on January 26, 2023, 05:22:07 PM

Title: looking for .375 brass or bullets
Post by: Recurver on January 26, 2023, 05:22:07 PM

I know its a long shot but looking for .375win brass or bullets

Title: Re: looking for .375 brass or bullets
Post by: MUSKRAT on January 26, 2023, 09:22:16 PM

I see most suppliers are out of stock
30-30 can be fireformed to 375 dimensions fairly easy ..
If all else fails

Title: Re: looking for .375 brass or bullets
Post by: Recurver on January 29, 2023, 08:39:36 PM

thanks

Title: Re: looking for .375 brass or bullets
Post by: Appleman on March 25, 2023, 06:54:11 AM

Good luck on that one...... I have a 375 Win on my 14 contender that I deer hunt with and have had trouble for the past 10 years finding much of anything.  375 H&H bullets too big for the 375 Win and no ammo or brass to be found. I'd be interested in the procedure of how to fireform MR-- can it be done without messing my contender up?  I did find some Sierra 200's but need some brass.

Title: Re: looking for .375 brass or bullets
Post by: Appleman on April 02, 2023, 09:58:11 AM

Still wondering about the fire forming process 30-30 win to 375 win for brass for reloading.  Any advice out there?

Title: Re: looking for .375 brass or bullets
Post by: MUSKRAT on April 02, 2023, 12:18:38 PM

You tube :
Fire forming 375 win from 30/30 brass ....
This guy Glen Larsen shows how in just a few easy steps ..
He uses 7 gr of unique powder in a primed 30/30 case , packs it well with tissue paper / grits .
Fires it his 375 Winchester contender ..
It conforms the case to .375 dimensions , all you gotta do is trim to length..
I've not tried this , but looks simple enough ..
Bob

Title: Re: looking for .375 brass or bullets
Post by: Appleman on April 06, 2023, 06:52:03 PM

good bull!  i'll check it out,  thanks Bob

Title: Re: looking for .375 brass or bullets
Post by: Appleman on April 08, 2023, 10:22:03 AM

i'm an old f@%^== didn't think of you tube.  now i'll have to get that powder, tissue paper, grits, and a case trimmer.  who knew 8)

Title: Re: looking for .375 brass or bullets
Post by: MUSKRAT on April 08, 2023, 01:38:24 PM

If you need 30/30 brass , I may have some ...

Title: Re: looking for .375 brass or bullets
Post by: Appleman on April 08, 2023, 09:22:46 PM

i might take you up on that Robert.

Title: Re: looking for .375 brass or bullets
Post by: MUSKRAT on April 09, 2023, 09:39:37 AM

PM sent

Title: Re: looking for .375 brass or bullets
Post by: Recurver on May 26, 2023, 07:25:47 PM

.375 brass is available new from a few vendors